Drain filters

Drain filters

Filters installed on the tank drain

Filters are specially designed for the installation of the tank is used to drain the hydraulic lines.

Drain filters are installed to drain gidromagistralyah heat exchanger or directly to the tank top cover. Installation of the discharge filter on top of the tank, half-sunk in the working fluid, the most preferable because precluded discharge pipeline station, after a filter, you can install a compact, tightly consolidate the filter and ensure convenient and easy replacement of contaminated filtroelementa after removal of the upper lid filter. Flow filter assemblies must conform to at least double, triple nominal feed pumps to ensure an acceptable service life until replacement components.

Sizes foreign filters designed to operate at temperatures from -25 to +110 ° C in the summer varieties working fluid kinematic viscosity 30 mm2 / s (type HLP DIN 51524, an analogue of the domestic hydraulic oil MGE-46V for TU 38.001347-83).

For reliable operation of hydraulic equipment in areas with moderate (U) and cold climates (HL) should be applied specially designed for hydraulic transmission hydraulic oil MH-15V (VMGZ on 38.101476-00 TU), kinematic viscosity 10.37 mm 2 / s at +50 ° C and at -40 ° C -1290 mm 2 / s